Have you been working in construction lately and have gone through the process of tile fixing? Yes? Well, then you might already know why you would need the best tile saw at work, right?

We all have gone through frustration when cutting tiles. Either they just break off or get chipped because of a poor cutter.

But there is a simple solution to these problems!

You just have to buy the best tile saw from the market, which will help you cut tiles like a PRO! With this cutting equipment, you will be making clean and smooth cuts on the tiles.

If you search online, you will find more than a few dozen different brands of tile saws. A large number of choices can make you confused about which one is the best tile saw.

There are even different types of tile saws available in the market; we will give you a thorough explanation in the second half of this post in the buyer’s guide section.

Contents

BEST TILE SAW REVIEWS 2020

Check out the buyers’ guide before you buy your first tile saw. We have laid down a lot of information for you down there.

If you are looking for any other kinds of construction tools, then you can head over to the home page of our website. You will find a wide variety of tools, reviews, and guides on Sawing Experts.

In this post, we have laid out the top 5 best wet tile saw reviews. All of these top rate tile saws are made by reputed companies and will offer the best performance and efficiency.

Shall we start with the best wet tile saw reviews then?

1] Chicago Pneumatics 10 Inch Industrial Best Tile Saw Review 2020 – Industrial Powerful Tile Saw

This is one of the best wet tile saw under $300. It has received very good ratings on Amazon from a lot of buyers.

This top rated tile saw is made by Chicago Pneumatics, who is a manufacturer based in the USA. They make all kinds of industrial and construction related tools and equipment.

You are going to get an elite-level performance out of this best wet tile saw for the money. It cuts like a champ. Not matter if you are a complete beginner or an expert, this tile saw for cutting ceramics is going to serve you well.

It has a large steel frame and linear bars to keep the cutting linear and precise.

The motor that runs the whole machine is a 2.5 horsepower motor, along with being a dual capacitor motor. The blade can achieve up to 3800 RPM with this motor.

This kind of RPM will give you the freedom to cut anything you like.

The maximum cutting capacity of this best wet tile saw is 24 inches, whereas the diagonal cut capacity is 18 inches.

You will be able to tilt the blade very easily because this saw is equipped with an adjustable cutting head. The blade can also be easily removed, as well.

Cool, right?

The diamond powder coated blade that is provided with the packaging is 0.05 inches thick and 10 inches in diameter. The overall cutting depth you can achieve with this industrial tile saw is 3.5 inches.

Furthermore, they have also added an overload protection system in this tile saw to add more safety. This system will not allow the saw to get overheated.

And as a result, your blade and saw both would have an increase in durability.

This is a wet tile saw, so it has a 3 gallon per minute water pump installed in it. The water will be continuously sprayed on your cutting are when you are cutting stuff.

It also has a water pan as well. This water tub is made out of hard ABS and will not crack on high impacts. The water tub removable so you can remove it and clean it if you like.

Thanks to the water, you don’t have to worry about dust and debris flying in the air and going into your lungs.

The whole saw is placed on a very sturdy steel ram, which helps keep things steady when you are cutting tiles.

The whole width of the tile saw 19.75 inches, and the length is 17 inches.

You can also do bevel cuts on this. With the help of the head pivot, you will be able to do 0 degrees, 22.5 degrees, and 45 degrees cuts.

The cutting head and the column are made out of heavy-duty cast allow. They even help reduce the vibrations during the cutting operation.

Lastly, you are going to get a 90-day warranty on this best tile saw. If you notice any manufacturing error or workmanship or material defects, then they will either repair it for free, or they will replace the saw.

Specifications

Amps 15
Horsepower 2.5
Speed (RPM) 3800
Blade Size (Inch) 10
Arbor Size (Inch) 5/8
Cutting Angle (°) 0 to 45
Table Dimensions (Inch) 24 X 19.75
Diagonal Cut Size (Inch) 18
Depth of Cut (Inch) 3.5@0° and 1.5@45°
Total Dimensions (Inch) 35 X 24 X 22.5
Weight (Pounds) 70.4

Included in the box

  • Water Pump
  • Water Tub
  • Miter Gauge
The Good
  • Quality built.
  • Easy to use.
  • Very clean and accurate cuts.
  • Efficient water delivery mechanism.
  • Bevel included.
  • Powerful motor.
The bad
  • The knobs are made of plastic.
  • Heavier than other competitors.

Our Thoughts

This best wet tile saw for the money is a great choice for both professionals as well as DIYers. This tile saw has everything that you will need to start the cutting projects at your home or at the worksite. If you are looking for a very high performance saw, then this is an ideal option.

Get The Best Price on Amazon

2] SKIL 3550-02 Professional Tile Saw Review 2020 – EDITORS CHOICE for Best Tile Saw

Let us present to you the Skil 7 Inch Wet Tile Saw. This is the product that we recommend everyone to buy. As evident from the 4-star rating from more than 400 buyers on amazon, this best wet tile saw is value for money.

This also happens to be the best tile saw under $200 in 2020.

Best tile sawSkil is a very popular name in the industry; they make some of the best power tools in the USA since 1924. Their products are very powerful, efficient, and reliable.

They design products very smartly; they even have hundreds of patents on their names for inventing cool features. This SKIL 3550-02 is an example of their exceptional R&D team.

Do you hate wasting water?

Well, you are going to love the Hydro Lock system on this best wet tile saw. This saw catches the water with the help of its upper and lower guards. The water sprayed is very near to the blade, which keeps everything cool.

No one wants an overheated system, right?

When we go out to buy the best Wet tile saw, the first thing we look at is the blade, agreed?

The blade on this Skill tile saw very sharp for optimum performance. This blade can cut stones, ceramics, and tiles very efficiently and smoothly.

The blade that is fitted in this tile saw is a 7-inch diameter & 1/8-inch-thick diamond powder-coated ultra-sharp blade. Well, we won’t say that it is very hard to install this blade inside the saw. You can exchange the blade very quickly, and you will be enjoying the smooth cutting experience.

The overall cutting depth capacity of this tile saw is 0.75 inches. If your material is thinner than this limit, then you are going to face no problems in cutting.

However, for tiles thicker than 0.75 inches, Skil has provided the ability to extend the blade. With the extension, your cutting ability will reach up to 1.75 inches.

Really impressive, right?

You can carry this skill tile saw everywhere you go; it will never be a hassle to you as it is a lightweight tile saw. The compact size means you won’t have to spare a lot of space to store this tile saw.

The weight of the saw is only 19 pounds, making it extremely portable. There is also a cord wrap included in the design of the tile saw with which you don’t have to worry about hanging wires and plugs.

Skill has added a sliding extension on both sides, which will come handy when you want the tile saw to be fixed on the ground without movement or being wobbly.

The side extension will enable you to cut tiles measuring 18 by 18 inches. This best tile saw for money will hardly move when you are cutting things with it.

Best tile sawThey have even added an adjustable rip fence, which will help you get highly precise cuts. There is also an in-built miter gauge, as well. Angle cutting is so easy with this tile saw; you can make 0 degrees, 22.5 degrees, and 45 degrees angle cuts with ease.

Nice, right!

The whole tabletop on this tile saw is made out of aluminum. And as we all know, all things made with aluminum are going to last very long. Now you don’t have to worry about rusting tile saw.

Specifications

Amps 5
Horsepower 2.5
Speed (RPM) 3600
Blade Size (Inch) 7
Arbor Size (Inch) 5/8
Cutting Angle (°) 0 to 45
Table Dimensions (Inch) 18 X 18
Diagonal Cut Size (Inch) 12
Depth of Cut (Inch) up to 1.75
Total Dimensions (Inch) 22 X 18 X 8.5
Weight (Pounds) 19

Included in the box

  • Skil 3550-02 Tile Saw
  • Blade Guard
  • Blade Wrenches
The Good
  • Made of durable and rust-resistant aluminum.
  • An extension is available.
  • Compact and lightweight.
  • Precise and accurate cuts.
  • Hydro lock system provided.
  • Reputed manufacturer with experience.
  • Perfect for beginners.
The bad
  • Even with the Hydro lock containment system, you are going to have a little bit of water spillage.

Our Thoughts

This is the best wet tile saw that you could buy in 2020 for your money’s worth. It is the best wet tile saw under $200; it comes with a diamond-coated blade, which will help you cut very accurately and quickly. With the water containment system, you won’t have to worry about water once you have filled the tub. If you are looking for a tile saw which ticks all the boxes, then this is the one.

Get The Best Price on Amazon

3] QEP 22400Q 4 Inch Torque Mater Best Wet Tile Saw Review 2020 – Compact & Cheap Tiles Saw

Yes, we know a lot of our readers are on a tight budget. So that’s why we bought you this best wet tile saw review of the QEP Torque Master Tile Saw.

Cheap does not mean bad all the time. This is the best tile saw under $100 on the market right now. You can check out the high ratings of customers on Amazon to see how this little, cheap, and cute saw has won hearts over.

But before we say anything else, we would like to state that this is not an industrial-sized tile saw. It is a very compact and highly portable tile saw. It is best suited for home DIYers and people who work out their garages in limited capabilities.

If you are a construction worker, then you won’t be satisfied with this saw at all. You are better off buying something else from our list.

This tile saw is best suited to people who need a compact saw, which is very portable and is easy to store in small spaces.

The overall weight of this compact wet tile saw is only 8 pounds. That is one of the lightest tile saws you can get online in 2020.

Best tile sawThe QEP 4 inch tile saw has a 3/5 HP motor and a high torque gear system. Being small in size, this tile saw will surprise you with its cutting capabilities.

This is a small beast.

This little beast can cut through terra cotta, granite, tiles, ceramic, etc. it will cut in almost all types of materials that you throw at it.

However, for saving weight, they have the body of this saw with plastic, although the plastic body is very firm and sturdy.

You can extend the sides of the table to get accuracy and precision when cutting. You can even tilt the table if you want. The blade speed of 4600 RPM in this tile saw will cut through anything.

Cool, yeah?

You will get scale on the side of the tool to keep your measurement in check. They have even provided a miter gauge as well to identify the cut size.

The blade which comes with the tile saw is a 4-inch diamond blade that will cut clean and smooth. You can cut at 22.5 and 45 degrees as well.

The overall cut depth on this tile saw is ¾ inch. It can cut straight, diagonal, miter cut, or even do profile cutting.

QEP tile saw comes with a rip guide, angle guide, and clip-on extension table as well.

Awesome, isn’t it?

QEP tile saw has a water catch system installed in it, which will reduce the wastage of water when cutting tiles. There is a water reservoir built inside the saw which will store and continuously supply water to the cutting area.

Best part?

With this tile saw, you can actually do an unlimited length diagonal and rip cut. That is fantastic, right?

With the tiles saw, you are going to get a free 1-year warranty from the manufacturer. They will repair or replace your saw for free if there are any manufacturing, material, or workmanship defects.

Specifications

Amps 4
Horsepower 3/5
Speed (RPM) 4600
Blade Size (Inch) 4
Arbor Size (Inch) 5/8
Cutting Angle (°) 0 to 45
Table Dimensions (Inch) 5 X 5
Diagonal Cut Size (Inch) Unlimited
Depth of Cut (Inch) 3/4
Total Dimensions (Inch) 14.25 X 15.75 X 4.5
Weight (Pounds) 8

Included in the box

  • QEP 4 Inch Tile Saw
  • 4 Inch Diamond Blade
  • Rip Guide
  • Angle Guide
  • Extension Table
The Good
  • Very lightweight and compact.
  • Extremely affordable.
  • High torque motor.
  • It can cut all types of materials.
  • The extension table provided.
  • Sturdy and Robust.
The bad
  • Not suitable for industrial use.
  • Shakes a little when cutting.

Our thoughts

This is a great affordable tile saw option for people who want to do small to medium jobs. If you are doing small DIY projects at home, then the best wet tile saw would make the most sense for buying. It is cheap, powerful, and cuts all kinds of material. Buy it today and start off your dream home project!

Get The Best Price on Amazon

4] Dewalt D24000 10 Inch Best Tile Saw Review 2020 – Best of the Best High-end Tile Saw

Do you work in the industry and are looking for something which will never give you any problems?

Best tile sawLook at the all-new Dewalt D24000 Tile Saw. It will cut any and everything that you throw at it with extreme precision and accuracy.

We highly recommend this product because of the following three reasons: it is made by one of the best companies out there, this is the best tile saw you could get in 2020, and the after-sales services of Dewalt are out of this world.

This Dewalt tile saw is really very portable, and you can actually disassemble it quickly to move it from Jobsite to Jobsite.

The overall weight of the best tile saw for money is 69 pounds. Although it is quite heavy, this saw can be fitted with a stand with the wheel to be able to move it anywhere you like without a problem.

It comes with a Porcelain blade that is 10 inches in diameter. This blade is capable of giving you a cut depth of 3-1/8 inches. The best part about it is that you can actually cut V-cap tiles and pavers with it.

Suited for outdoor usage, this tile saw can work anywhere you like.

Dewalt 10 inch 24000 tile saw has the ability to adjust the depth of the cut as well.

We just love the cantilever rail provided on this professional tile saw. With this feature, you can actually get a ripping capacity of 24 inches.

The diagonal cut length on this tile saw is 18 inches. This will be very handy when cutting large tiles.

Cool, right?

There is also a miter gauge provided in the tool which can use to make cuts at both 22.5 And 45-degree angle. There is an accessory called the cutting cart extension, which will be a very crucial part of the tool for people who need large support for the longer tiles.

The D24000 Dewalt tile saw can be assembled very quickly, and no adjustment is needed before you start cutting stuff.

There are numerous different things that can be tweaked as per the user’s choice. These things include a rail system, cart scale, bevel pointer, cut indicator, and cutting head rolling cart.

This tile saw comes with a 5-gallon water reservoir as well. This water pan is made out of sturdy ABS and can be detached for cleaning purposes.

The huge quantity of the water will make sure that throughout the cutting period, your saw and the blade stay cool. You can further change the position of the two nozzles that are provided near the cutting area.

The big rubber spray hoods on the side are going to play an important role in not letting the water runoff in all directions. According to the users, this saw the cleanest working tile saw they have seen.

The total cutting capacity to rip cut in this tile is 25 inches, or you can increase it up to 28 inches with the help of a plunge. The diagonal cut capacity is 18 inches.

If you are doing cuts of more than 18 inches, then the cut line indicators and the stainless-steel roller are going to support you cut with accuracy.

The while frame of this best wet tile saw is made out of aluminum, which will last you for years to come if not decades.

Best part?

They have added a storage compartment on the saw itself to store thins like side extensions, blade wrench, a hex wrench, and miter gauge.

The motor on the tile saw is of 1.5 horsepower, and it will deliver the best performance against all kinds of materials like marble, fiberglass, ceramic, granite, and porcelain.

Dewalt is very famous for its after-sales service. They provide a 30-day money-back guarantee if you don’t like the tile saw and want to give it back.

You will also get a free 1-year service warranty during which you can get the tile saw repaired and serviced for free.

Amazing, right?

Lastly, they even provide a 3-year warranty against manufacturing or material defects.

Specifications

Amps 15
Horsepower 1.5
Speed (RPM) 4200
Blade Size (Inch) 10
Arbor Size (Inch) 5/8
Cutting Angle (°) 0 to 45
Table Dimensions (Inch) 28
Diagonal Cut Size (Inch) 18 X 18
Depth of Cut (Inch) 3-1/8
Total Dimensions (Inch) 36 X 29 X 24
Weight (Pounds) 69

Included in the box

  • Dewalt D2400 Tile saw
  • DW4764 10-inch Porcelain Tile Blade
  • Submersible pump
  • Water pan
  • Side water tray
  • Hex wrench
  • Angle guide
  • Rip guide
  • Blade wrench
  • Rear water tray
  • Cutting car side extension
The Good
  • Reputed manufacturer.
  • 3-year warranty.
  • The best tile saw you can find on the market.
  • Lots of free accessories.
  • Free extension table provided.
  • Excellent water saving system.
  • Can cut any material with excellent accuracy.
The bad
  • It is very heavy.
  • Not suitable for beginners.
  • A bit costlier than competitors.

Our thoughts

The Dewalt D2400 tile saw is the one you should buy if you are very serious about your cutting business. It even astonishes professionals with its accuracy and clean cuts. This tile saw is powerful enough to cut anything you throw at it. You are not going to touch any other tile saws after you start using this one. This model is a standout model, and there is nothing in this segment that can match what this tile saw offers.

Get The Best Price on Amazon

5] Skil 3540-02 7 Inch Best Wet Tile Saw Review 2020 – Best wet Tile Saw Under $100

If you need a tile saw, which is affordable, compact, and does the job well.

Skil 3540-02 tile saw is the answer!

Best tile sawThis whole top support of this best wet tile saw for money is made out of anti-corrosion stainless steel. This top support has dimensions of 12 X 12 inches.

We all want out cutting to be precise and clean, right?

The adjustable rip fence on this awesome tile saw is very accurate and will help you with precision cutting.

Skil also has added a safety feature that will prevent the blade from heating up too much. There is a blade cooling reservoir that will constantly spray out water near the cutting area to keep things cool.

You will get a bevel as well with which you will be able to make angle cuts of 22.5 degrees and 45 degrees.

Awesome, eh?

The total crosscut capacity of this tile saw is 7.75 niches, whereas the diagonal cut capacity is 7.25 inches. The depth cut length on this best wet tile saw is 1-3/8 inches, which will help you cut a lot of different thickness tiles.

You can cut a tile with 1-inch thickness at 90 degrees and 24 degrees as well.

The 7-inch blade which comes with the tile saw is powder diamond coated. It will destroy anything that you throw at it – be it marble, ceramic, porcelain, or any other hard material.

The tile saw is rated at 120V AC and has a 4.2-amp rating. This saw has enough power to tackle everything that comes it’s way.

You will get a blade speed of 3600 RPM with CULus safety certification as well.

Do you hate cleaning?

Best tile sawWe admit it can be a big pain to clean up a tile saw after you have finished working with it. But this SKIL tile saw was made with easy-clean design. The water reservoir on this tile saw is removable, so you can take it out and clean it after use.

You will get a guard to store your blades, wrenches, and other small tools. You are also going to get a free carbide circular saw blade, which is also compatible with this tile saw.

The overall weight of this saw is only 17.7 pounds. It can be taken everywhere with you with ease. As it is compact as well, you won’t have a problem storing it anywhere you like.

The total dimension of the tile saw is 18 X 14.5 X 7.8 inches.

We all love and care about our machines, right?

That’s why SKIL is giving a very long 3-year warranty on their best wet tile saw. If anything goes wrong, you just have to contact them, and they sort it out for you.

Specifications

Amps 4.2
Horsepower 1.5
Speed (RPM) 3600
Blade Size (Inch) 7
Arbor Size (Inch) 5/8
Cutting Angle (°) 0 to 45
Table Dimensions (Inch) 12 X 12
Diagonal Cut Size (Inch) 7.25
Depth of Cut (Inch) 1-3/8
Total Dimensions (Inch) 18 X 14.5 X 7.8
Weight (Pounds) 17.7

Included in the box

  • Skil 3540-02 7 Inch Tile Saw
  • 7 inch diamond coated saw blade
  • Carbide saw blade
  • Blade guard
  • Blade wrenches
The Good
  • Compact.
  • Lightweight.
  • Powerful.
  • Durable and reputed brand.
  • Very affordable.
  • 3-year warranty.
The bad
  • The water reservoir is smaller compared to competitor tile saws.
  • Not suitable for industrial usage.

Our thoughts

This is one of the best tiles saw under $100. It is cheap, compact, lightweight, and packs a whole lot of power punch. You can cut whatever you want with this awesome tile saw. As it is made by Skil, we have no doubts about its performance, durability, and reliability. Buy it today for your DIY projects.

Get The Best Price on Amazon

Buyers’ Guide

Now that you have read the best wet tiles reviews, you might have already decided your mind on which professional tile saw you want from the market, right?

But wait!

Do you know how to see if your chosen tile saw is good enough? Well, read on, and we will tell you how to choose the best tiles saw on the market that has value for money.

It’s important to know everything about a tool before purchasing one. You should have at least a basic understanding of how the tool works and what each model/brand has to offer.

This guide is mainly geared towards beginners who are interested in knowing more about the best wet tile saws and want to start their own DIY projects.

Let’s start with the basics.

What is a tile saw used for?

The main usage of tile saw is done in construction work. This is a type of saw which is used to cut rocks, stone, and tiles mainly.

The blade rotates with the help of the motor and cuts the tiles. Water is sprayed continuously near the blade and cutting surface to keep things cool and to remove all the debris away from the cut.

How to use a tile saw?

Make sure the surface of the saw leveled out with the ground. The surface of the saw should be secured and fixed in a place.

Next, you need to attach the source of water so that the wet tile saw can continuously spray water onto the cutting area. Take the tile which you want to cut and place it flat on the surface of the tile saw.

After that, you need to adjust the fence to make sure the tile is lined up with the mark on the tile saw. Now you just have to turn the tile saw on and move the tile toward the blade until the cut is done.

Simple, yeah?

What kind of blade is used in a tile saw?

Most of the tile saw using a diamond blade for cutting purposes. Diamond blade the hardest blades that you will find on the market.

A good diamond blade will help you cut a wide variety of things like marble, glass, stone, granite, ceramic, and porcelain. The following is a very general idea of which type of diamond blade to use on what kind of material:

  • The diamond blade for cutting glass should have a very fine grit. As the glass is a very fragile material, the fine grit pattern will prevent the glass from chipping.
  • If you are going to cut porcelain with your tile saw, then you should have a diamond blade that is made for cutting the hardest of materials. You will get a remark on the blade manufacturers’ website stating if the blade can cut porcelain or not.
  • Ceramic diamond blades are specially made by the manufacturers for cutting ceramics. You can browse the manufacturer’s website, and you will find all the data there.

Why is a wet tile saw best for cutting tiles/stone/ceramics?

  • When you use a dry diamond blade to cut stone or tiles, you will inevitably be showered in the dust. The tiles and stone contain silica, which converts into silica dust and may go into your lungs and cause problems. With a wet tile saw, the amount of dust released in the air will be a minimum. You can even work without a mask on tile saw.
  • The best wet tile saws make better and cleaner cuts when cutting tiles. We all want our homes to be fitted with the perfect tiles without any gaps or inconsistencies, right? So, using these wet tile saws will offer that possibility.
  • With the wet tile saws, the friction between the blade and tiles does not cause very high temperatures. This is a great thing when considering that the tiles start to crack up and chip off when they get very hot.
  • Wet tile saw blades are protected because the temperature does not get very high because of the friction. The water helps the blade stay cool and hence improves the life cycle of the blade. The wet saw blade is going to last longer compared to the same type of blade on a dry saw.

If you want to go into the details of the blade, well then, check out the following points:

  • Segmented Rim Blades: these are also called dry cutting blades and are used mainly in cutting concrete pavers, limestone slabs, or masonry blocks. They have a cutout design and cooled by the air only. These blades will provide rough cuts and would give off a bit less dust/debris during cutting.
  • Continuous Rim Blades: these blades are used in wet tile saws only. You can some of the best cuts when using this blade; they are cooled off with water and are best for cutting things like marble, slate, porcelain, ceramics, or other hard materials.
  • Turbo Rim Blades: you can use this type of blade in both dry and wet tile saws. The segments between the rim on this blade are small and enough for the air to pass through them in order to cool off even without water. These types of blades tend to push out the material faster and can give you very clean cuts.

Two types of wet tile saws.

  • You can buy a recirculating pump saw on the market. This tile saw will have its own water reservoir, which will hold a certain amount of water in it. There will be a filtering system installed on the saw as well, which will filter out all the debris from the water and re-send it to be sprayed near the cutting area.
  • This tile saw will not bother you with adding a source of water and making sure the water keeps on coming throughout the project. You might have to refill the water reservoir after a while, though, because of the wastage of water in splashing.
  • If you don’t want the hassle of cleaning the filters and filling up the reservoir, then you can opt for the freshwater saw. This saw has a faucet that you connect to a tap, and the saw will continuously spray water on its own.

Things to look for in the best tiles saw

Budget

Buying a professional cutting tool is no cheap, and you are not going to buy it frequently. So, it is necessary to decide on a budget; we would not advise anyone to go for the cheapest tool available on the market.

Generally, the cheapest tile saws are really bad at cutting clean cuts, and the performance of those is not consistent. You are very quickly going to be fed up with it.

There is also a safety risk in cheap products. Buy your tools from reputed and trusted brands only.

Cut size and Cut quality

We all have cuts that are not smooth or clean, correct?

No one wants their cuts to come out lopsided. So, check the quality of cuts before hands by taking a demo of at least talking with the experts about the tile saw you have chosen. We don’t want to brag, but if you choose any tile saw from the list above, you won’t have to ask another expert. Just buy any you like!

Warranty

Warranty is very important when buying any tools. This is a safety net for your money in case the tile saw has any manufacturing error or workmanship or materials defects.

Investing money in a tile saw brand which offers a long warranty period is what we would do.

Weight

You are going to be using the tile saw for your worksite and could be moving it around frequently. So, it’s important to know how heavy the tile saw is beforehand.

If your tile saw is going to be placed at one spot all the time, then there’s nothing to worry about. But if your work makes you carry around the tiles saw, then see if you would be comfortable handling the tiles saws weight all the time.

Applications

Whenever we buy any construction tool, we ask ourselves a question – what else could we use this tool for?

You can buy tiles saws that are specially made to cut stone or maybe porcelain. Knowing beforehand about all the things you are going to with the tile saw will help immensely.

If you know about the things you are going to be cutting at work, then it would be easier to choose a tile saw.

Power

This is one of the most important aspects of buying a tile saw. You need to know what the tiles saw will be able to handle.

Most of the time, you will see the power stated as watts in manufacturers’ catalogs.

  • High end: If you are working full time on a construction site or at the job, then you would need a heavy-duty tile saw with the maximum power. The biggest tile saws have a power range of about 900 watts, although they can go even higher in some expensive models. You can cut concrete, masonry, and a wide variety of hard materials with these saws.
  • Medium powered: People who are newcomers in this field but are very passionate about learning and doing their own DIY projects should opt for tile saws with an approx. Power range around 600 watts. They will cut almost all materials the same as the high-end ones.
  • Beginner level: The power range on small tile saws is around 400 watts and can cut porcelain, ceramics, and glass. The limit of this kind of entry-level saw is 1.5 inches. Anything thicker than this, and the saw won’t be able to cut it.

Stand or no stand

Some of the best wet tile saw come with their own stands. It up to you to decide if you want one. If you have a proper working area counter, then you won’t probably need a stand.

These stands are usually made with anti-resistant steel or aluminum. They are even good at reducing vibration to some extent.

Other features

  • Spares: every piece of equipment is going to have broken or worn out parts at some point. Make sure to buy your tools from a brand that is well established so that you can get spare whenever you want.
  • Feed rate: you will need a different kind of feed rates for different materials. On average, the thicker the material, the slower the feed rate. Having an adjustable feed rate option would be great in a tile saw. With that, you can change the feed rate according to the material.
  • Overheat guard: check if there is a safety system installed in the saw which can shut it off as soon as the sensors detect overheating from the tile saw.
  • Side extension: this feature is god sent for people who want to cut larger tiles on smaller tile saws.
  • Protective case: this is one of the most important safety features to avoid any hazard.
  • Bevel: having a bevel will enable you to cut at an angle or rounded edges or curve shapes on tile saws.

Frequently Asked Questions

What tool is the best to cut a tile?

Well, you can use a wet tile to cut tiles efficiently. But you can also use a masonry saw as well, it is also very good for cutting tiles.

Both types of saws are specially designed and engineered to cut hard materials. Masonry tile saw is mostly used to cut stone, but it is a good choice for tiles as well.

Which tile saw size should I opt for?

This completely depends on the type of work you are going to do. If you are just trimming bits of bathroom tiles, then there is no point in wasting money on buying a big tile saw.

Alternatively, if you are in a construction job, then you will need a tile saw with professional quality, and big size saw you are going to encounter all types of big projects on your Jobsite.

  • 10-inch blade: you should buy these blades if you are working for flooring, thick pavers, and wall tiles. They can cut up to 2.6 inches in depth.
  • 8-inch blade: these blades will give you a cut depth of up to 2 inches.
  • 7-inch blade: with a 1.5-inch cut depth, this blade size is best for wall tile cutting.

Give me some safety tips.

  • Make sure you check the sharpness of the blade before starting out any project.
  • Always wear safety goggles.
  • Put on those work gloves you have a store in some unopened cabinet for years.
  • Don’t go overboard and try to cut things that are too much to handle for your tile saw.
  • Always wear a face mask when not using a wet tile saw, that dust is not good for your lungs.
  • Don’t act like a pro and do things without measuring them out first. Even the professionals measure and mark the cutouts before they start cutting stuff.

Last words

Good job reading through our whole post!

We really hope we have helped you in choosing the best tiles saw for yourself. All of the five options reviewed in this post will appeal to different kinds of people.

If you ask us to recommend a tile to saw our readers, then we would like to recommend two of the above saws.

The first is the Dewalt D24000 tiles saw. This is the perfect tile saw for people who are working in demolition, plumbing, construction, and similar type of fields. They would need something that can handle rough usage and could cut through the toughest of the materials.

The Dewalt is the perfect companion for you if you need something very serious by your times when working.

Another tile saw we would recommend everyone is the SKIL 3550-02 tiles saw. This saw is considerably cheaper than the Dewalt one and would be affordable to a wide array of people.

If you are in need of the best wet tile saw but don’t have a huge budget, then this is the one you should go with.

At the end of the day, it about the type of work you are going to do with the tile saw.

If you have questions or queries, then please use the comment box below, we would be very happy to answer all your questions.

Have a nice day!

LEAVE A REPLY

Please enter your comment!
Please enter your name here